Sale! 31 Plate AT4 Single Pass Mueller Plate cooler - Wall Mount

$5,820.00 $4,475.00
(You save $1,345.00)
(No reviews yet) Write a Review
SKU:
M-9816136
Mueller Plate Cooler - Plate Heat Exchanger
 
Made In USA by Paul Mueller Company
 
• 31 Plates
• Single Pass
• Water Flow up to 50 gpm
• Complies with 3A sanitary standards
• 304 stainless steel end frames
• 316 stainless steel plates
• Stainless steel compression bolts with brass nuts
• Glue in gaskets
• Clean-in-place system reduces cleaning time and keeps maintenance costs low
 
Mueller Accu-Therm® plate heat exchanger lets you use your existing water supply to precool warm milk before putting it in your milk cooler. The Accu-Therm will cut the operation time of your refrigeration system up to 50% and save energy and money while enhancing your milk quality.
 
 Dimensions and specs:
 
  Milk inlet and outlet - 1.5 inch triclamp
  Water inlet and outlet - 1.0 inch MPT Male Pipe Thread
  Length - 12 inches
  Width - 7.5 inches
  Height - 23 inches
  shipping weight is 95 pounds (plus pallet)
 
 
 16 Mueller Models available. Call if you don't see what you need.
 
Efficient Heat transfer pre-cools your milk with potable cold tap water. Saves money on electric costs by removing 1/3 or more of the heat from your milk. This reduces run time of your milk tank compressors while extending the life of your cooling system.
 
31 Plate model is ideal for small Goat and Sheep dairy farms and very small on farm milk processors
 
 
Mueller Plate Cooler - Plate Heat Exchanger Efficient Heat transfer pre-cools your milk with potable cold tap water. Saves money on electric costs by removing 1/3 or more of the heat from your milk. This reduces run time of your milk tank compressors while extending the life of your cooling system.
 
31 Plate model is ideal for smaller dairy farms and milk processors Install between the milk transfer pump and Milk cooling tank. 
 
Proven design is efficient and saves money on cooling costs. The only operating component is the solenoid valve. Your electric company may coop or rebate part of the cost of this item.
 
Milk cooled per hour - up to 450 gallon
 
Gaskets are replaceable 1001-261 1.5 debris screen gasket is required and included. Order water solenoid valve separately.
 
An Accu-Therm® plate heat exchanger lets you use your existing water supply to precool warm milk before putting it in your milk cooler. The Accu-Therm will cut the operation time of your refrigeration system up to 50% and save energy and money while enhancing your milk quality. Mueller Accu-Therm plate heat exchangers consist of a series of stainless steel plates compressed in a frame. The plates are separated by gaskets that form flow channels on opposite sides of each plate. Cool water flows down the channel on one side while warm milk flows up the other side. The milk's temperature drops as it transfers its heat to the cool water on the opposite side of the plate. The plate heat exchanger's design provides extremely efficient performance for fast precooling.
 
 
 
Replacement Gasket and parts:
 
1001-261 - Screen Gasket for 1.5 clamp
M-9400937 - Mueller Replacement glue in gasket
21030 Brass Water Solenoid valve - available 110v or 220v or 24v
 
updated Feb 2024