Pulstar vacuum operated pulsator
Choice of Single or dual
choose at drop down menu above
* adjustable pulsation
* works with any conventional claw
* only 4 moving parts, dependable, low maintenance
* adapters available for all major brands of stallcocks
* available in single or dual outlet Available in both dual and single units (choose above)
* spare parts kit at link below - item number 505-10120NP
the vacuum operated PULSTAR pulsator provides a technically sound and low cost alternative to electronic and pneumatic pulsation. There is no worry about electrical contacts or wiring for the pulsators or sticking slide mechanisms. This is not only less irritating to you, but it is also better for your cows. With positive, reliable pulsation, milking is faster and udder health is improved. The PULSTAR is very simple having only 3 moving parts and no lubrication is required. If it is accidentally dropped in the gutter, not to worry, unscrew the cap with a 1/4 turn and hose it out. Water does not hurt the PULSTAR. Aside from normal cleaning, scheduled maintenance is recommended at 2,000 hour intervals or annually whichever occurs first. Pulsator Repair Kits are available to replace all wearing parts and can be installed without special training or tools. The clear dome allows full view of the pulsator mechanism so if something happened to foul the unit it would be immediately apparent. Getting the unit back into operation is as simple as removing the dome and components to spot the problem and correct it.
Nupulse PULSTAR pulsators will work with any milker unit and on any system. They can be installed one at a time with existing pulsators, so the cost can be spread out over time.
10059NP Single hose Pulstar Vacuum Pulsator
10058NP Dual hose Pulstar Vacuum Pulsator
10120NP Rebuild Kit for Pulstar pulsators