Please call for availability
Shipping cost is based on your specific location
170 gallon Milk cooling Tank
650 Liters
Meets 3A and Grade A standards for USA and Canada
Ideal for Goat, Sheep or very small cow dairy farms and micro dairy operations.
- 230 volts
- Running amps 10.7A
- Max amps 19A
- 60 HZ
- Single Phase voltage
- Weight 445 lbs
- Refrigerant R404A
- 2 HP compressor
- 15604 BTU per hour cooling capacity
*Requires electrician to wire to breaker box*
2 Inch clamp style valve with a sloped bottom for complete emptying.
Digital temperature display and adjustable thermostat. (see photo)
Adjustable feet for easy leveling on sloped milk room floors.
7" hole in the lid for inspection, sampling and milk straining. (see photo)
Agitator stops turning when the lid is raised to open.
Dimensions:
43 inches Wide
64 inches long (includes compressor)
52 inches high
Height with lid open = 72 inches
Stainless Steel construction inside and outside with layer of insulation between the walls for maximum efficiency
Max Capacity: 174 Gallons
Min Capacity: 17 Gallons required to reach the agitator paddle and cover the cooling plate. (less than 17 gallon will cause the milk to freeze to the bottom and may damage the cooler.)
Please call to order. Supplies are limited and frequently sell out.
This item will ship LTL on a pallet via Freight TRUCK
MP Series cooling tanks are available in 9 different capacities, covering a range from 14 Gallons to 285 Gallons
Optional Chart recorder may be required - ask your milk inspector prior to purchase
For 2 or 4 milkings -
Note: Tank is not to be filled more than 50% in 1 milking.
Comes With:
Grade A Valve Kit with End Cap, Gaskets & Clamps
Dipstick & Calibration Chart
Instruction Book
MVP650 Imported
Updated November 2023
