30 gallon or 100 liter Milk cooling Tank
LIMITED AVAILABILITY - PLEASE CALL BEFORE ORDERING
Shipping cost is based on your specific location
Meets 3A and Grade A standards for USA and Canada
Ideal for Goat, Sheep or very small cow dairy farms and micro dairy operations.
- 115 volts
- 20 amp circuit
- 60 HZ
- Single Phase voltage.
Plugs into a 115V Standard USA electric Outlet.
2 Inch clamp style valve with a sloped bottom for complete emptying.
Digital temperature display and adjustable thermostat. (see photo)
Adjustable feet for easy leveling on sloped milk room floors.
7" hole in the lid for inspection, sampling and milk straining. (see photo)
Agitator stops turning when the lid is raised to open.
- 30 inches Wide
- 48 inches high
- Height with lid open = 66 inches
Stainless Steel construction inside and outside with layer of insulation between the walls for maximum efficiency
Max Capacity: 30 Gallons
Min Capacity: 5 Gallons required to reach the agitator paddle and cover the cooling plate. (less than 5 gallon will cause the milk to freeze to the bottom and may damage the cooler.)
Please call to order. Supplies are limited and frequently sell out.
This item will ship LTL on a pallet via Freight TRUCK. call to check availability and shipping cost
MP Series cooling tanks are available in 9 different capacities, covering a range from 15 Gallons to 285 Gallons
Optional Chart recorder may be required - ask your milk inspector prior to purchase
For 2 to 4 milkings -
Note: Tank is not to be filled more than 50% in 1 milking.
Grade A Valve Kit with End Cap, Gaskets & Clamps
Dipstick & Calibration Chart
Recommended detergent and brush for cleaning a links below