1 HP MILK TRANSFER PUMP with intake hose and fittings
For Low to medium volume applications such as small milking systems or transferring 100-400 gallon or less at one time
1.5 TRICLAMP IN
1.5 TRICLAMP EXIT.
EASY TO WASH AND ASSEMBLE. TRANSFER PUMP IN SMALL PROCESSING PLANTS.
- new Stainless Steel pump body and 4 blade impeller
- new 1 hp 230 volt painted motor 1 phase (3 phase motor available)
- new MPK11 seal kit installed
- new 1.5 foot HD intake hose with clamp fitting on pump end and bevel seat fitting on milk tank end
- new hose adaptor for outlet side. (this fitting is available for hose sizes 5/8, 3/4, 1 or 1.5 inch ID)
- new HD clamps and silicone gaskets
- new spare parts include 1 xtra seal kit and 2 silicone flange gaskets
Required but not included
- wiring and electrical switch.
Installation by a qualified electrician recommended.
Pump motor must grounded before operating.
- outlet hose (Hose ID and length needed to determine what hose to order)
1090-008 - 3/4 inch ID hose
1090-010 - 1 inch ID hose
- 1407 pump stand. Depending on the height of your product tank valve, you may want a stand to raise up the pump or you can request a longer intake hose when ordering.
- 21575 stainless steel motor upgrade (see picture in detail images)
MPK11 - Replacement seal kit
21575 1 HP Stainless Steel Motor with threaded shaft
21586 1 HP Painted motor with threaded shaft
21585 3/4 HP Painted motor with threaded shaft
21584 1/2 HP Painted motor with threaded shaft
10185 1 HP pump with painted motor
10186 1 HP pump with stainless steel motor
1406 New 1 hp transfer pump with hoses and fittings
1405 Rebuilt 1/2 hp transfer pump with hoses and fittings
1407 Stainless Steel Stand for milk pump
old part number 501-SSMTP-1