Used on Hamby Dairy Supply Goat and sheep milking assemblies
Goat; 1587 1588
Sheep / Mini Goat; 1592
- 1550 - 1/2 inch I.D. silicone Milk hose
- 9716 - 1/2 inch I.D. silicone Milk hose
- 1090-002 1/2 inch I.D. plastic Milk hose
ITP205 is an individual milking claw incorporating unique automatic shut-off valves which automatically control the vacuum supply to each liner during both milking and washing.
As soon as the teat enters the liner, the valve automatically opens. Then, when the teat is removed at the end of milking, rapid air intake creates a vacuum in the valve which automatically closes it.
This offers a range of benefits:
Fewer operations both during milking.
Less vacuum fluctuation
when liners are fitted and removed, thus avoiding undesirable consumption of vacuum and suck up of dirt.
Valves close automatically if the cluster is kicked off.
An unhealthy teat can be isolated during milking.
Easy to inspect for cleaning and maintenance.
High impact resistant materials are used to construct the milking claw.
Replacement parts in stock at Hamby Dairy Supply
Spare Parts - See Links below
ITP 205 Spare Parts - See Links below
ITP2040030 Set - Upper and Lower O-Rings
(old o-ring numbers ITP2040005 ITP2040004 )
ITP2050019 Wash Pin
ITP2040002 Screw on black bottom
ITP2000003 Stainless Steel Shutoff disk
ITP2059001 Set of 2 ITP205 Goat / sheep milker autovalves
Made in Italy
Original parts by Interpuls