88 gallon capacity Milk cooling Tank
300 liters
LIMITED AVAILABILITY - PLEASE CALL BEFORE ORDERING
Shipping cost is based on your specific location
Meets 3A and Grade A standards for USA and Canada
Ideal for Goat, Sheep or very small cow dairy farms and micro dairy operations.
- 115 volts
- Running amps 6.4A
- Max amps 10.10A
- 60 HZ
- Single Phase voltage
- Weight 282 lbs
- Refrigerant R404A
- 1.25 HP compressor
- 9513 BTU per hour cooling capacity
- 20 amp circuit
Plugs into a 115V Standard USA electric Outlet.
2 Inch clamp style valve with a sloped bottom for complete emptying.
Digital temperature display and adjustable thermostat. (see photo)
Adjustable feet for easy leveling on sloped milk room floors.
7" hole in the lid for inspection, sampling and milk straining. (see photo)
Agitator stops turning when the lid is raised to open.
Dimensions:
- 40 inches Wide
- 50 inches high
- Height with lid open = 67 inches
Stainless Steel construction inside and outside with layer of insulation between the walls for maximum efficiency
Max Capacity: 87.7 Gallons
Min Capacity: 13.2 Gallons required to reach the agitator paddle and cover the cooling plate. (less than 13.2 gallon will cause the milk to freeze to the bottom and may damage the cooler.)
Please call to order. Supplies are limited and frequently sell out.
This item will ship LTL on an oversize pallet via Freight TRUCK
- Estimated shipping weight approx 380 pounds
MP Series cooling tanks are available in 9 different capacities, covering a range from 14 Gallons to 285 Gallons
Optional Chart recorder may be required - ask your milk inspector prior to purchase
For 2 or 4 milkings -
Note: Tank is not to be filled more than 50% in 1 milking.
Comes With:
Grade A Valve Kit with End Cap, Gaskets & Clamps
Dipstick & Calibration Chart
Instruction Book
MPV300 Imported
updated July 2024
Recommended detergent and brush for cleaning a links below
