Transfer Pump with 3A fittings for Milk Plan Tanks 2 inch clamp

$2,200.00 $2,000.00
(You save $200.00)
(No reviews yet) Write a Review
Sanitary Transfer Pump with fittings for Milk Plan Cooling or Transfer Tank
and any 2 inch triclamp aka sanitary clamp outlet
Fits 2 inch clamp style butterfly valve that comes standard on Milk Plan Tanks in USA.
Includes a 2 inch x 1.5 inch offset eccentric reducer
You will need to specify length of Tigerflex Intake Hose.  It is included up to 4 feet. 
You will need to choose 3/4 inch or 1 inch outlet transfer hose (fitting is included - we need to know which one to ship)
You will need to order either 3/4 or 1 inch outlet transfer hose - sold per foot
See detail images for exact items in this kit.
Note this item must be washed and sanitized after every use along with the Milk Tank valve. 
Please note this transfer pump is GRAVITY PRIME.  The pump inlet must be below the outlet valve of the Milk Cooling Tank.   Anderson pumps have a 4 blade stainless steel impeller for efficient pumping, but they do not create suction, therefore it is gravity prime.
Once finished transferring milk to the processing kettle or transport tank, then this pump and tubing can be CIP cleaned in place connected to the empty Milk Plan tank using the 3 standard steps for CIP cleaining that include warm water rinse, hot detergent wash, and final rinse with clear water or acid solution.
* Warning! Double check the measurement - This item is not returnable

MP Transfer Pump Kit Includes;

  • 1 - 2 x 1.5 inch offset SS Reducer to allow complete empty of tank
  • 1 - 1.0 inch outlet (3/4 hose outlet is available option)
  • 1 - 2.0 HD Stainless Steel Clamp
  • 1 - 2.0 Silicone Gasket
  • 3 - 1.5 HD Clamp
  • 3 - 1.5 BUNA Rubber Gasket
  • 3 - 1.5 Silicone Gaskets
  • up to 4 feet of 1.5 inch I.D. Tigerflex tranfer hose for pump intake to tank valve
  • 2 - 1.5 stainless steel tubing with clamp ends that go inside Tigerflex hose aka Tygon Hose Connectors
  • 1 - Transfer pump with single phase motor (3 phase available - call to order)
  • 1 - Spare Seal Kit for transfer pump
  • 1 - set of legs, stainless steel with 4 inch height  (Made in USA)


* Sanitary fittings for dairy and food processing equipment are measured differently than other industries. Note that a 2.0 outlet valve such as used on Milk Plan tanks has a 1.8 inch Inside Diameter.
This item fits 2.0 inch butterfly valves on newer Milk Plan Tanks sold in the USA
MilkPlan Sanitary Transfer pump
This kit also works as a wash pump on many Bulk Milk Tank Washers.  Recommended for Oval tanks.   Call to order so we can send correct fittings to hook up to your bulk tank.
Assembled in USA by Hamby Dairy Supply.

Spare Parts List


1000-010 -  1 inch outlet transfer hose - per foot (not included above)

61058 - End Cap with pipe for 1 inch transfer hose

1000-008 -  3/4 inch outlet transfer hose - per foot (optional and not included above)

61057 - End Cap with pipe for 3/4 inch transfer hose

1090-050FT - Tigerflex Milk Transfer Hose for pump inlet - 1.5 inch I.D. (included) This goes between the butterfly valve on the milk tank and the front intake on the transfer pump

1015-000 Anderson Sanitary Transfer Pump

1011-123 Milk Transfer Pump Motor 56c Single phase (call if you need 3 phase) 1 hp or 3/4 hp

MPK15 - Spare Seal Kit for transfer Pump


17062 - 2  inch Butterfly Valve clamp x clamp (shown in main photo but not included)

1000-182 - 2 inch x 1.5 inch - Eccentric Reducer for SS clamp ferrule (Offset)

1000-941 - 1.5 inch Clamp x Hose Adapter fits TigerFlex and Tygon Sanitary Transfer Hose


17131 HD 2.0 Stainless Steel Clamp

17130 HD 1.5 Stainless Steel Clamp

1000-002 - 2 inch Clamp Buna Rubber Plain Gasket

1000-027 - 2 inch Clamp Silicone Flange Gasket

1000-001 - 1.5 inch Clamp Buna Rubber Plain Gasket

1000-026 - 1.5 inch Clamp Silicone Flange Gasket

1000-502  - 2.0 Snap Clamp



3100-45 Tapper Fill Kit with 45 degree elbow

3100-90 Tapper Fill Kit with 90 degree elbow


30-C020 2.0 inch clamp style GooseNeck Milk Tank Tapper


Updated March 2024